Injection Molding Machine Manufacturers: Global Brands, Indian Leaders & How to Choose the Right One
- Shubh Poojara
- Jan 18
- 5 min read
Injection molding machine manufacturers play a crucial role in shaping today’s global manufacturing landscape. From automotive and medical devices to FMCG packaging and electronics, the performance of the machine directly impacts part quality, cycle time, and profitability.
Buyers are no longer just looking for brand names, they’re looking for clarity:
Which manufacturers dominate globally?
Which machines are actually used in India?
And most importantly, do you really need to buy a machine, or just get your parts molded?
This guide answers all three.
Global Injection Molding Machine Manufacturers (Country-Wise Overview)
European Injection Molding Machine Manufacturers (Precision & Automation)
Country | Leading Manufacturers | Known For |
Austria | Engel | Tie-bar-less machines, automotive & medical |
Germany | Arburg, KraussMaffei, Sumitomo (SHI) Demag | Precision, automation, high-end engineering |
Switzerland | Netstal | High-speed PET & thin-wall packaging |
Italy | Negri Bossi | Flexible machines, wide tonnage range |
Best for: Automotive, medical, high-precision components
Limitation: High capital cost, longer ROI for small molders
Japanese Injection Molding Machine Manufacturers
(Speed & Reliability)
Manufacturer | Strength |
Nissei | Ultra-precision molding |
JSW | Large tonnage & structural parts |
Fanuc | All-electric, cleanroom-ready |
Toshiba, Shibaura, Sumitomo | Energy efficiency, repeatability |
Best for: Electronics, connectors, tight-tolerance parts
Limitation: Expensive spares and service outside metro cities
Chinese Injection Molding Machine Manufacturers
(Cost & Scale)
Manufacturer | Positioning |
Haitian | World’s largest by volume |
Chen Hsong | Global mid-range supplier |
Yizumi | Automation-ready systems |
Borche | Value-for-money machines |
Best for: Cost-sensitive, high-volume production
Limitation: Performance depends heavily on process know-how
North American Injection Molding Machine Manufacturers
Country | Manufacturer | Specialty |
USA | Milacron | Full plastic processing ecosystem |
Canada | Husky | PET preforms & packaging systems |
Top 10 Injection Molding Machine Brands in India
India is one of the fastest-growing markets for injection molding and not all global brands are practical here.
Below are the Top 10 injection molding machine manufacturers in India, based on availability, service network, and ROI.
Manufacturer | Country of Origin | Key Strengths / Why It’s in Top 10 |
Milacron | USA | Well-established global brand with strong local presence; broad machine range including hydraulic, hybrid, and electric types. |
Windsor Machines | India | Legacy Indian manufacturer with large installed base and cost-effective machines. |
Haitian | China | One of the largest injection molding machine makers globally; good price-performance for Indian users. |
Toshiba Machine | Japan | Precision-oriented machines, ideal for electronics and automotive applications. |
JSW (Japan Steel Works) | Japan | Strong in high-speed and electric machines with good efficiency. |
Sumitomo (SHI) Demag | Japan/Germany | High-precision, energy-efficient machines suitable for medical and technical parts. |
Engel | Austria | Premium machines with advanced automation and Industry-4.0 capabilities. |
Arburg | Germany | Known for robust and reliable machines with wide application range. |
KraussMaffei | Germany | Premium European machines suited to complex and high-precision applications. |
Borche | China | Affordable machines with solid reliability; popular with entry-to-mid-level manufacturers. |
Commonly Used Injection Molding Machine Types in India
Most Indian projects don’t need exotic machines. They need reliable, cost-efficient configurations.
Machine Type | Typical Use in India |
Hydraulic Injection Molding Machine | Automotive, furniture, industrial parts |
Servo hydraulic Injection Molding Machine | FMCG, consumer goods |
All electric Injection Molding Machine | Medical, electronics, cleanroom |
Vertical Injection Molding Machine | Insert molding, electrical components |
70–80% of Indian injection molding projects run on servo-hydraulic machines between 80–450 tons.
Before selecting a machine, engineers often rely on an injection molding tonnage calculator to ensure the clamping force matches the projected part area and material pressure.
Buying a Machine vs Getting Parts Molded: The Real Decision
Most blogs stop at listing injection molding machine manufacturers. But buyers usually have a deeper question:
“Should I invest ₹50 lakhs–₹5 crores in a machine—or just get my parts injection molded?”
When Buying a Machine Makes Sense
Daily production volume is guaranteed
Multiple SKUs justify utilization
In-house tooling & process expertise exists
When Outsourcing Injection Molding Is Smarter
New product development
Uncertain demand
High tooling + machine risk
Faster go-to-market needed
Instead of investing heavily in equipment, many manufacturers are now evaluating injection molding outsourcing as a smarter, more flexible production strategy.
How Injection Molding Machine Choice Impacts Your Part Cost
Factor | Direct Impact |
Clamping force mismatch | Flash, short shots, mold damage |
Slow cycle time | Higher per-part cost |
Poor repeatability | Rejections & rework |
High energy consumption | Margin erosion |
This is why experienced injection molding partners matter more than the machine brand itself, especially when it comes to preventing injection molding defects.
Don’t Just Choose a Machine, Choose the Right Injection Molding Partner
If your goal is plastic parts, not owning machines, the smartest move is to work with a molding partner who already operates machines from top injection molding machine manufacturers—and knows how to extract profit from them.
Get a quote for your injection molding project
Machine selection handled for you
Tooling + molding under one roof
Optimized for Indian cost structures
Suitable for startups, SMEs, and OEMs
You focus on selling your product. Let Plast Fab handle the injection molding.
FAQs: Injection Molding Machine Manufacturers
1. Which company is best for an injection molding machine?
There is no single “best” injection molding machine manufacturer for every application. Globally, companies like Haitian, ENGEL, KraussMaffei, Arburg, Milacron, JSW (Japan Steel Works), and Sumitomo (SHI) Demag are considered industry leaders. The best choice depends on factors such as required tonnage, machine type (hydraulic, electric, or hybrid), automation needs, part precision, and availability of local after-sales support.
2. Who makes injection molding machines globally?
Injection molding machines are manufactured by leading companies across several countries. Germany, Japan, China, Austria, the USA, and Canada dominate the global market. Well-known manufacturers include ENGEL (Austria), KraussMaffei and Arburg (Germany), Haitian and Yizumi (China), JSW and Nissei (Japan), Husky (Canada), and Milacron (USA).
3. What is the cost of an injection molding machine in India?
The cost of an injection molding machine in India varies widely based on tonnage, brand, and technology:
200-ton machine: ₹18–25 lakhs (approx.)
500-ton machine: ₹55–75 lakhs (approx.)
1000-ton machine: ₹70 lakhs to ₹1.2 crore+Prices can vary depending on whether the machine is hydraulic, electric, or hybrid, and whether it is imported or locally assembled.
4. Which country is best for injection molding machines?
Each country has its strengths in injection molding technology. Germany and Japan are known for high-precision, premium machines, China is recognized for cost-effective, high-volume production machines, and Austria (ENGEL) is known for advanced automation and integrated systems. The “best” country depends on whether the priority is precision, cost, energy efficiency, or production scale.
5. Is buying an injection molding machine always the best option?
Not necessarily. For many businesses, especially startups or low-to-medium volume manufacturers, outsourcing injection molding can be more cost-effective than investing in a machine. Factors such as high capital cost, maintenance, skilled manpower, and risk of defects often make partnering with an experienced injection molding supplier a smarter decision than owning the machine.